Introduction to loops
And now the real fun begins -- in the next set of lessons, we’ll cover loops. Loops are control flow constructs that allow a piece of code to execute repeatedly until some condition is met. Loops add a significant amount of flexibility into your programming toolkit, allowing you to do many things that would otherwise be difficult.
For example, let’s say you wanted to print all the numbers between 1 and 10. Without loops, you might try something like this:
#include <iostream>
int main()
{
std::cout << "1 2 3 4 5 6 7 8 9 10";
std::cout << " done!\n";
return 0;
}While that’s doable, it becomes increasingly less so as you want to print more numbers: what if you wanted to print all the numbers between 1 and 1000? That would be quite a bit of typing! But such a program is writable in this way because we know at compile time how many numbers we want to print.
Now, let’s change the parameters a bit. What if we wanted to ask the user to enter a number and then print all the numbers between 1 and the number the user entered? The number the user will enter isn’t knowable at compile-time. So how might we go about solving this?
While statements
The while statement (also called a while loop) is the simplest of the three loop types that C++ provides, and it has a definition very similar to that of an if-statement:
while (condition)
statement;
A while statement is declared using the while keyword. When a while-statement is executed, the expression condition is evaluated. If the condition evaluates to true, the associated statement executes.
However, unlike an if-statement, once the statement has finished executing, control returns to the top of the while-statement and the process is repeated. This means a while-statement will keep looping as long as the condition continues to evaluate to true.
Let’s take a look at a simple while loop that prints all the numbers from 1 to 10:
#include <iostream>
int main()
{
int count{ 1 };
while (count <= 10)
{
std::cout << count << ' ';
++count;
}
std::cout << "done!\n";
return 0;
}This outputs:
1 2 3 4 5 6 7 8 9 10 done!
Let’s take a closer look at what this program is doing.
First, we define a variable named count and set it to 1. The condition count <= 10 is true, so the statement executes. In this case, our statement is a block, so all the statements in the block will execute. The first statement in the block prints 1 and a space, and the second increments count to 2. Control now returns back to the top of the while-statement, and the condition is evaluated again. 2 <= 10 evaluates to true, so the code block is executed again. The loop will repeatedly execute until count is 11, at which point 11 <= 10will evaluate to false, and the statement associated with the loop will be skipped. At this point, the loop is done.
While this program is a bit more code than typing all the numbers between 1 and 10, consider how easy it would be to modify the program to print all the numbers between 1 and 1000: all you’d need to do is change count <= 10 to count <= 1000.
While-statements that evaluate to false initially
Note that if the condition initially evaluates to false, the associated statement will not execute at all. Consider the following program:
#include <iostream>
int main()
{
int count{ 15 };
while (count <= 10)
{
std::cout << count << ' ';
++count;
}
std::cout << "done!\n";
return 0;
}The condition 15 <= 10 evaluates to false, so the associated statement is skipped. The program continues, and the only thing printed is done!.
Infinite loops
On the other hand, if the expression always evaluates to true, the while loop will execute forever. This is called an infinite loop. Here is an example of an infinite loop:
#include <iostream>
int main()
{
int count{ 1 };
while (count <= 10) // this condition will never be false
{
std::cout << count << ' '; // so this line will repeatedly execute
}
std::cout << '\n'; // this line will never execute
return 0; // this line will never execute
}Because count is never incremented in this program, count <= 10 will always be true. Consequently, the loop will never terminate, and the program will print 1 1 1 1 1… forever.
Intentional infinite loops
We can declare an intentional infinite loop like this:
while (true)
{
// this loop will execute forever
}The only way to exit an infinite loop is through a return-statement, a break-statement, an exit-statement, a goto-statement, an exception being thrown, or the user killing the program.
Here’s a silly example demonstrating this:
#include <iostream>
int main()
{
while (true) // infinite loop
{
std::cout << "Loop again (y/n)? ";
char c{};
std::cin >> c;
if (c == 'n')
return 0;
}
return 0;
}This program will continuously loop until the user enters n as input, at which point the if-statement will evaluate to true and the associated return 0; will cause function main() to exit, terminating the program.
It is common to see this kind of loop in web server applications that run continuously and service web requests.
Best practice
Favor while(true) for intentional infinite loops.
Loop variables and naming
A loop variable is a variable that is used to control how many times a loop executes. For example, given while (count <= 10), count is a loop variable. While most loop variables have type int, you will occasionally see other types (e.g. char).
Loop variables are often given simple names, with i, j, and k being the most common.
As an aside…
The use of i, j, and k for loop variable names arose because these are the first three shortest names for integral variables in the Fortran programming language. The convention has persisted since.
However, if you want to know where in your program a loop variable is used, and you use the search function on i, j, or k, the search function will return half of the lines in your program! For this reason, some developers prefer loop variable names like iii, jjj, or kkk. Because these names are more unique, this makes searching for loop variables much easier, and helps them stand out as loop variables. An even better idea is to use “real” variable names, such as count, index, or a name that gives more detail about what you’re counting (e.g. userCount).
The most common type of loop variable is called a counter, which is a loop variable that counts how many times a loop has executed. In the examples above, the variable count is a counter.
Integral loop variables should be signed
Integral loop variables should almost always be signed, as unsigned integers can lead to unexpected issues. Consider the following code:
#include <iostream>
int main()
{
unsigned int count{ 10 }; // note: unsigned
// count from 10 down to 0
while (count >= 0)
{
if (count == 0)
{
std::cout << "blastoff!";
}
else
{
std::cout << count << ' ';
}
--count;
}
std::cout << '\n';
return 0;
}Take a look at the above example and see if you can spot the error. It’s not very obvious if you haven’t seen this before.
It turns out, this program is an infinite loop. It starts out by printing 10 9 8 7 6 5 4 3 2 1 blastoff! as desired, but then loop variable count overflows, and starts counting down from 4294967295 (assuming 32-bit integers). Why? Because the loop condition count >= 0 will never be false! When count is 0, 0 >= 0 is true. Then --count is executed, and count wraps around back to 4294967295. And since 4294967295 >= 0 is true, the program continues. Because count is unsigned, it can never be negative, and because it can never be negative, the loop won’t terminate.
Best practice
Integral loop variables should generally be a signed integral type.
Doing something every N iterations
Each time a loop executes, it is called an iteration.
Often, we want to do something every 2nd, 3rd, or 4th iteration, such as print a newline. This can easily be done by using the remainder operator on our counter:
#include <iostream>
// Iterate through every number between 1 and 50
int main()
{
int count{ 1 };
while (count <= 50)
{
// print the number (pad numbers under 10 with a leading 0 for formatting purposes)
if (count < 10)
{
std::cout << '0';
}
std::cout << count << ' ';
// if the loop variable is divisible by 10, print a newline
if (count % 10 == 0)
{
std::cout << '\n';
}
// increment the loop counter
++count;
}
return 0;
}This program produces the result:
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
Nested loops
It is also possible to nest loops inside of other loops. Nested loops tend to be a bit confusing to new programmers, so let’s start with a slightly easier example:
#include <iostream>
void printUpto(int outer)
{
// loop between 1 and outer
// note: inner will be created and destroyed at the end of the block
int inner{ 1 };
while (inner <= outer)
{
std::cout << inner << ' ';
++inner;
}
} // inner destroyed here
int main()
{
// outer loops between 1 and 5
int outer{ 1 };
while (outer <= 5)
{
// For each iteration of the outer loop, the code in the body of the loop executes once
// This function prints numbers between 1 and outer
printUpto(outer);
// print a newline at the end of each row
std::cout << '\n';
++outer;
}
return 0;
}In this example, we have an outer loop with a counter named outer that counts from 1 to 5. For each iteration of the loop, the body of the loop calls printUpto() using the outer loop variable as an argument, prints a newline, and increments outer. The printUpto() function also has a loop which prints all the numbers between 1 and the value passed in.
Therefore, when outer is 1, the loop body calls printUpto(1), which prints the number 1. The loop body then prints a newline and increments outer. Now outer is 2. The loop body executes again, calling printUpto(2), which prints 1 2. The loop body prints another newline and increments outer. Successive iterations call printUpto(3), printUpto(4), and printUpto(5).
Therefore, this program prints:
1 1 2 1 2 3 1 2 3 4 1 2 3 4 5
Note that this is a form of a nested loop -- in the body of the outer loop, we’re calling a function that has a loop itself. In other words, for each iteration of the outer loop, the loop in the function executes.
Now let’s move to the more confusing example:
#include <iostream>
int main()
{
// outer loops between 1 and 5
int outer{ 1 };
while (outer <= 5)
{
// For each iteration of the outer loop, the code in the body of the loop executes once
// inner loops between 1 and outer
// note: inner will be created and destroyed at the end of the block
int inner{ 1 };
while (inner <= outer)
{
std::cout << inner << ' ';
++inner;
}
// print a newline at the end of each row
std::cout << '\n';
++outer;
} // inner destroyed here
return 0;
}This program has the exact same output:
1 1 2 1 2 3 1 2 3 4 1 2 3 4 5
Because we have a while-loop nested directly within another while-loop, this looks a bit more confusing. However, all we’ve done is put the code that used to be inside the printUpto() function directly inside the outer loop body.
Let’s examine how this works in more detail.
First, we have an outer loop (with loop variable outer) that will loop 5 times (with outer having values 1, 2, 3, 4, and 5 successively).
On the first iteration of the outer loop, outer has value 1, and then the outer loop body executes. Inside the body of the outer loop, we have another loop with loop variable inner. The inner loop iterates from 1 to outer (which has value 1), so this inner loop will execute once, printing the value 1. Then we print a newline, and increment outer to 2.
On the second iteration of the outer loop, outer has value 2, and then the outer loop body executes. Inside the body of the outer loop, inner again iterates from 1 to outer (which now has value 2), so this inner loop will execute twice, printing the values 1 and 2. Then we print a newline, and increment outer to 3.
This process continues, with the inner loop printing 1 2 3, 1 2 3 4, and 1 2 3 4 5 on successive passes. Eventually, outer is incremented to 6, and because the outer loop condition (outer <= 5) is then false, the outer loop is finished. Then the program ends.
If you’re still finding this confusing, stepping through this program in a debugger line-by-line and watching the values of inner and outer is a good way to get a better understanding of what’s happening.
Quiz time
Question #1
In the above program, why is variable inner declared inside the while block instead of immediately following the declaration of outer?
Question #2
Write a program that prints out the letters a through z along with their ASCII codes. Use a loop variable of type char.
Question #3
Invert the nested loops example so it prints the following:
5 4 3 2 1 4 3 2 1 3 2 1 2 1 1
Question #4
Now make the numbers print like this:
1
2 1
3 2 1
4 3 2 1
5 4 3 2 1
Hint: Figure out how to make it print like this first:
X X X X 1 X X X 2 1 X X 3 2 1 X 4 3 2 1 5 4 3 2 1