Integers are great for counting whole numbers, but sometimes we need to store *very* large numbers, or numbers with a fractional component. A **floating point** type variable is a variable that can hold a real number, such as 4320.0, -3.33, or 0.01226. The *floating* part of the name *floating point* refers to the fact that the decimal point can “float”; that is, it can support a variable number of digits before and after the decimal point.

There are three different floating point data types: **float**, **double**, and **long double**. As with integers, C++ does not define the actual size of these types (but it does guarantee minimum sizes). On modern architectures, floating point representation almost always follows IEEE 754 binary format. In this format, a float is 4 bytes, a double is 8, and a long double can be equivalent to a double (8 bytes), 80-bits (often padded to 12 bytes), or 16 bytes.

Floating point data types are always signed (can hold positive and negative values).

Category | Type | Minimum Size | Typical Size |
---|---|---|---|

floating point | float | 4 bytes | 4 bytes |

double | 8 bytes | 8 bytes | |

long double | 8 bytes | 8, 12, or 16 bytes |

Here are some definitions of floating point numbers:

1 2 3 |
float fValue; double dValue; long double ldValue; |

When using floating point literals, always include at least one decimal place (even if the decimal is 0). This helps the compiler understand that the number is a floating point number and not an integer.

1 2 3 |
int x{5}; // 5 means integer double y{5.0}; // 5.0 is a floating point literal (no suffix means double type by default) float z{5.0f}; // 5.0 is a floating point literal, f suffix means float type |

Note that by default, floating point literals default to type double. An f suffix is used to denote a literal of type float.

Best practice

Always make sure the type of your literals match the type of the variables they’re being assigned to or used to initialize. Otherwise an unnecessary conversion will result, possibly with a loss of precision.

Warning

Make sure you don’t use integer literals where floating point literals should be used. This includes when initializing or assigning values to floating point objects, doing floating point arithmetic, and calling functions that expect floating point values.

Printing floating point numbers

Now consider this simple program:

1 2 3 4 5 6 7 8 |
#include <iostream> int main() { std::cout << 5.0 << '\n'; std::cout << 6.7f << '\n'; std::cout << 9876543.21 << '\n'; } |

The results of this seemingly simple program may surprise you:

5 6.7 9.87654e+06

In the first case, the std::cout printed 5, even though we typed in 5.0. By default, std::cout will not print the fractional part of a number if the fractional part is 0.

In the second case, the number prints as we expect.

In the third case, it printed the number in scientific notation (if you need a refresher on scientific notation, see lesson 4.7 -- Introduction to scientific notation ^{[1]}).

Floating point range

Assuming IEEE 754 representation:

Size | Range | Precision |
---|---|---|

4 bytes | ±1.18 x 10^{-38} to ±3.4 x 10^{38} |
6-9 significant digits, typically 7 |

8 bytes | ±2.23 x 10^{-308} to ±1.80 x 10^{308} |
15-18 significant digits, typically 16 |

80-bits (typically uses 12 or 16 bytes) | ±3.36 x 10^{-4932} to ±1.18 x 10^{4932} |
18-21 significant digits |

16 bytes | ±3.36 x 10^{-4932} to ±1.18 x 10^{4932} |
33-36 significant digits |

The 80-bit floating point type is a bit of a historical anomaly. On modern processors, it is typically implemented using 12 or 16 bytes (which is a more natural size for processors to handle).

It may seem a little odd that the 80-bit floating point type has the same range as the 16-byte floating point type. This is because they have the same number of bits dedicated to the exponent -- however, the 16-byte number can store more significant digits.

Floating point precision

Consider the fraction 1/3. The decimal representation of this number is 0.33333333333333… with 3’s going out to infinity. If you were writing this number on a piece of paper, your arm would get tired at some point, and you’d eventually stop writing. And the number you were left with would be close to 0.3333333333…. (with 3’s going out to infinity) but not exactly.

On a computer, an infinite length number would require infinite memory to store, and typically we only have 4 or 8 bytes. This limited memory means floating point numbers can only store a certain number of significant digits -- and that any additional significant digits are lost. The number that is actually stored will be close to the desired number, but not exact.

The precision of a floating point number defines how many *significant digits* it can represent without information loss.

When outputting floating point numbers, std::cout has a default precision of 6 -- that is, it assumes all floating point variables are only significant to 6 digits (the minimum precision of a float), and hence it will truncate anything after that.

The following program shows std::cout truncating to 6 digits:

1 2 3 4 5 6 7 8 9 10 11 12 |
#include <iostream> int main() { std::cout << 9.87654321f << '\n'; std::cout << 987.654321f << '\n'; std::cout << 987654.321f << '\n'; std::cout << 9876543.21f << '\n'; std::cout << 0.0000987654321f << '\n'; return 0; } |

This program outputs:

9.87654 987.654 987654 9.87654e+006 9.87654e-005

Note that each of these only have 6 significant digits.

Also note that std::cout will switch to outputting numbers in scientific notation in some cases. Depending on the compiler, the exponent will typically be padded to a minimum number of digits. Fear not, 9.87654e+006 is the same as 9.87654e6, just with some padding 0’s. The minimum number of exponent digits displayed is compiler-specific (Visual Studio uses 3, some others use 2 as per the C99 standard).

The number of digits of precision a floating point variable has depends on both the size (floats have less precision than doubles) and the particular value being stored (some values have more precision than others). Float values have between 6 and 9 digits of precision, with most float values having at least 7 significant digits. Double values have between 15 and 18 digits of precision, with most double values having at least 16 significant digits. Long double has a minimum precision of 15, 18, or 33 significant digits depending on how many bytes it occupies.

We can override the default precision that std::cout shows by using the std::setprecision() function that is defined in the *iomanip* header.

1 2 3 4 5 6 7 8 9 10 |
#include <iomanip> // for std::setprecision() #include <iostream> int main() { std::cout << std::setprecision(16); // show 16 digits of precision std::cout << 3.33333333333333333333333333333333333333f <<'\n'; // f suffix means float std::cout << 3.33333333333333333333333333333333333333 << '\n'; // no suffix means double return 0; } |

Outputs:

3.333333253860474 3.333333333333334

Because we set the precision to 16 digits, each of the above numbers is printed with 16 digits. But, as you can see, the numbers certainly aren’t precise to 16 digits! And because floats are less precise than doubles, the float has more error.

Precision issues don’t just impact fractional numbers, they impact any number with too many significant digits. Let’s consider a big number:

1 2 3 4 5 6 7 8 9 10 |
#include <iomanip> // for std::setprecision() #include <iostream> int main() { float f { 123456789.0f }; // f has 10 significant digits std::cout << std::setprecision(9); // to show 9 digits in f std::cout << f << '\n'; return 0; } |

Output:

123456792

123456792 is greater than 123456789. The value 123456789.0 has 10 significant digits, but float values typically have 7 digits of precision (and the result of 123456792 is precise only to 7 significant digits). We lost some precision! When precision is lost because a number can’t be stored precisely, this is called a rounding error.

Consequently, one has to be careful when using floating point numbers that require more precision than the variables can hold.

Best practice

Favor double over float unless space is at a premium, as the lack of precision in a float will often lead to inaccuracies.

Rounding errors make floating point comparisons tricky

Floating point numbers are tricky to work with due to non-obvious differences between binary (how data is stored) and decimal (how we think) numbers. Consider the fraction 1/10. In decimal, this is easily represented as 0.1, and we are used to thinking of 0.1 as an easily representable number with 1 significant digit. However, in binary, 0.1 is represented by the infinite sequence: 0.00011001100110011… Because of this, when we assign 0.1 to a floating point number, we’ll run into precision problems.

You can see the effects of this in the following program:

1 2 3 4 5 6 7 8 9 10 11 |
#include <iomanip> // for std::setprecision() #include <iostream> int main() { double d{0.1}; std::cout << d << '\n'; // use default cout precision of 6 std::cout << std::setprecision(17); std::cout << d << '\n'; return 0; } |

This outputs:

0.1 0.10000000000000001

On the top line, std::cout prints 0.1, as we expect.

On the bottom line, where we have std::cout show us 17 digits of precision, we see that d is actually *not quite* 0.1! This is because the double had to truncate the approximation due to its limited memory. The result is a number that is precise to 16 significant digits (which type double guarantees), but the number is not *exactly* 0.1. Rounding errors may make a number either slightly smaller or slightly larger, depending on where the truncation happens.

Rounding errors can have unexpected consequences:

1 2 3 4 5 6 7 8 9 10 11 12 13 |
#include <iomanip> // for std::setprecision() #include <iostream> int main() { std::cout << std::setprecision(17); double d1{ 1.0 }; std::cout << d1 << '\n'; double d2{ 0.1 + 0.1 + 0.1 + 0.1 + 0.1 + 0.1 + 0.1 + 0.1 + 0.1 + 0.1 }; // should equal 1.0 std::cout << d2 << '\n'; } |

1 0.99999999999999989

Although we might expect that d1 and d2 should be equal, we see that they are not. If we were to compare d1 and d2 in a program, the program would probably not perform as expected. Because floating point numbers tend to be inexact, comparing floating point numbers is generally problematic -- we discuss the subject more (and solutions) in lesson 5.6 -- Relational operators and floating point comparisons ^{[2]}.

One last note on rounding errors: mathematical operations (such as addition and multiplication) tend to make rounding errors grow. So even though 0.1 has a rounding error in the 17th significant digit, when we add 0.1 ten times, the rounding error has crept into the 16th significant digit. Continued operations would cause this error to become increasingly significant.

Key insight

Rounding errors occur when a number can’t be stored precisely. This can happen even with simple numbers, like 0.1. Therefore, rounding errors can, and do, happen all the time. Rounding errors aren’t the exception -- they’re the rule. Never assume your floating point numbers are exact.

A corollary of this rule is: be wary of using floating point numbers for financial or currency data.

NaN and Inf

There are two special categories of floating point numbers. The first is Inf, which represents infinity. Inf can be positive or negative. The second is NaN, which stands for “Not a Number”. There are several different kinds of NaN (which we won’t discuss here). NaN and Inf are only available if the compiler uses a specific format (IEEE 754) for floating point numbers. If another format is used, the following code produces undefined behavior.

Here’s a program showing all three:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 |
#include <iostream> int main() { double zero {0.0}; double posinf { 5.0 / zero }; // positive infinity std::cout << posinf << '\n'; double neginf { -5.0 / zero }; // negative infinity std::cout << neginf << '\n'; double nan { zero / zero }; // not a number (mathematically invalid) std::cout << nan << '\n'; return 0; } |

And the results using Visual Studio 2008 on Windows:

1.#INF -1.#INF 1.#IND

*INF* stands for infinity, and *IND* stands for indeterminate. Note that the results of printing *Inf* and *NaN* are platform specific, so your results may vary.

Best practice

Avoid division by 0 altogether, even if your compiler supports it.

Conclusion

To summarize, the two things you should remember about floating point numbers:

1) Floating point numbers are useful for storing very large or very small numbers, including those with fractional components.

2) Floating point numbers often have small rounding errors, even when the number has fewer significant digits than the precision. Many times these go unnoticed because they are so small, and because the numbers are truncated for output. However, comparisons of floating point numbers may not give the expected results. Performing mathematical operations on these values will cause the rounding errors to grow larger.

4.9 -- Boolean values ^{[3]} |

Index ^{[4]} |

4.7 -- Introduction to scientific notation ^{[1]} |